Perhaps one of the scariest situations you can find yourself in is when your toilet bowl or sink stops working. Water is sloshing around and refuses to go down the drain. If the situation is dire enough, you may start to feel an increase of panic as the water levels rise within your sink or toilet and begin overflowing onto the floor. As any wise homeowner would do, you call a service provider for drain cleaning riverside ca to fix the problem. Interestingly enough, they may offer up two solutions–using a snake or a hydrojet. You may not know the difference. This article will discuss the two key main types of solutions for unclogging a drain and why a HydroJet is the better of two options.
The Snake
A plumbing snake, sometimes called an auger, is that familiar piece of plumbing equipment that is dipped into the pipe. It’s a metal tube that encases a cable. On the one end is a corkscrew type of blade and on the other is a crank. There are two different kinds of snakes. One is the typical straight-line snake that is used for sinks. For toilets, a J-shaped snake is used, so it can work its way through the odd shape of a toilet pipe. The snake carefully makes its way to the clogged portion of the pipe and the plumber can even grab it with the snake and pull it out, or they can poke a hole through it which allows the water to leave the pipe.
HydroJet
A HydroJet, on the other hand, offers a more sophisticated means of unclogging a drain. This wire is also placed through the pipe, but one end has a special nozzle and it is connected to a water pressure machine. Essentially, HydroJet cleaning uses the force of pressurized water to break down the clog. It can destroy clogs. In cases where tree roots have grown into the pipes, the HydroJet has even been shown to be able to break through that root and keep the pipe clear. Since a HydroJet is so powerful, a plumber usually inspects the pipe first to make sure it isn’t worn down or broken. Otherwise, a HydroJet might damage the pipe further simply due to the force that it can utilize in destroying clogs.
The HydroJet Advantages
There are a lot of advantages that the HydroJet has over the traditional plumbing snake. For one, it can be easily used in both sinks and toilet bowls without needing special variations. Second, it does a better job of clearing out the pipe. A plumbing snake only has a chance of being able to snatch out whatever it is that’s clogging the drain. Otherwise, it can only poke a hole through the clog. This only allows for a temporary form of relief until the clog eventually seals up again, and the homeowner is in need of a de-clogging service once more. The HydroJet can destroy most clogs which remove that problem. As such, the HydroJet is an excellent solution for tough clogs that just can’t be removed by the snake. It’s also environmentally safe since it only uses water to unclog drains. In other situations, harsh chemicals may be poured down the drain in an attempt to dissolve the clog. This can erode the pipe and poison the groundwater.
Although the use of a HydroJet does require additional equipment to be used beforehand such as a camera for pipe inspection, this actually helps the homeowner to know more about the state of their pipes. In addition, the use of a HydroJet also cleans the pipe while it unclogs the problem area. This means that there will be more time before another clog arises because the sides of the pipe have had the sludge removed from them. Finally, it’s an easy method to clean the pipes. The plumber doesn’t have to dig anything up in order to reach the pipe.
Call an Expert
While you may feel like giving the HydroJet a try yourself, that is usually not recommended. You might just end up destroying your pipes in the process. If you have a clog and you’re interested in using a HydroJet to clear it out, then have a plumber perform the job for you. They can inspect the pipe to make sure it’s safe to use on, and then do the job effectively.
